We often get asked…”How is the cost of having our House Calculated?” Here is How:

Painting is one of the quickest and easiest ways to give your home’s interior a facelift — and it is one that can produce dramatic results as well. Unfortunately, many homeowners feel overwhelmed when tasked with choosing a lasting color scheme. To avoid getting stuck with a less-than-perfect color choice, they will spend hours studying the subtleties between Smokey Topaz and Roycroft Suede paint swatches, considering the mood they want to create (whimsical? relaxing? modern edge?), and deciding whether to trust their guts or hire an interior decorator to make sure things turn out just right.

Fortunately, interior painting doesn’t have to be that difficult. Most paint stores offer samples that you can take home for a wall test. With these samples, you can paint a few colors in large swaths on your wall to see the how the paint interacts with the room’s natural light. And you can compare it against design elements like pillows or furniture to see whether it will work with your overall decor as well.

Calculating Room Painting Costs

The cost to paint an average size room (10X12) ranges from $380, not including ceilings, trim or cost of the paint. DIY, this can cost between $200-$300. When estimating the cost, Paintway will start with how much paint will be required to complete the job. To know this, we first need to know the size of the area to be covered.

The easiest way to calculate the size of the paintable area is to add together the length of the wall and multiply it by the width of the room from floor to ceiling. The resulting amount is the room’s square footage. This total is a starting point, as it is not all paintable surface. Paintway won’t paint the windows and doors, for example, and they must account for ceiling trim and baseboards as well.

The next step is to subtract the area of the doors and windows — along with the square footage of the trim and baseboards — to get an average. Then, use the same calculation (length x width) on the windows, doors, trim and baseboards, and subtract all of those numbers. The result of this equation is the square footage of the room’s walls. This is your surface area number. We will typically add a little square footage back in to this amount to account for extra paint, which may be required.

Room Painting Cost Factors Here are some other cost factors to consider when it comes to the cost of painting a room:

Size of Room to be Painted

The size of the room to be painted is the most important factor in determining the cost of professional painting. It will take a paintway longer to cover a large room than a small room, and this means higher labor costs in addition to supplies and time. When estimating the paint for such a job, keep in mind that a litre of paint covers about 400 square feet (though the label claims it will cover 450 square feet). You will be charged for the number of paint cans needed, among other factors.

Textured Walls

A textured wall will need more paint than a smooth wall. The texture adds more surface area, even though it doesn’t increase square footage. Determining the additional surface area depends on how much texture there is. Paintway will probably estimate about 300 to 350 additional square feet of paint to account for texture. Factor additional surface area into your square footage calculations when seeking professional estimates.

Speed Factor

The speed with which a paintway can complete the job will determine its final cost, but time is difficult to estimate. Some painters have more experience and cover a wall faster, but some are more methodical and take more time. Most painters should be able to cover about 100 to 120 square feet of flat surface in an hour, unless they are working on a very large wall. Wood or plaster might reduce that amount to 80 to 100 square feet. You should also consider the time required for a first coat to dry before a second coat may be applied. This will add time as well — anywhere from one to 48 hours depending on the paint.

Multiple Rooms or Whole House

If you decide to paint multiple rooms in your home, choose colors that relate to one another without being completely the same — unless uniformity is your goal, of course. Costs may vary based on differences in color, gloss and room size. However, each room will flow depending on the trim’s color — which should all be white or neutral — so they look connected.

A whole-house color scheme presents the same cost factors as painting multiple rooms individually: colors you choose, the gloss, the size of the rooms and time/labor. You can choose to use the same color throughout your entire home to save on money, or you can use a color scheme with the same gloss throughout, though this isn’t recommended for selling purposes.

Interior House Painting Cost Factors

Average Paint Prices

Generally, it will take a minimum of two litres of paint to cover a room. At the highest end, paint will cost anywhere between $30 and $60 per litre and come in three different finishes: flat, semi-gloss or high-gloss. Flat finishes are the least shiny and are best suited for areas requiring frequent cleaning. Semi-gloss finishes are a bit shiny but can also be easily cleaned. A high-gloss finish is stain-resistant and easy to clean. Traditionally, living rooms should be painted with a flat finish to allow the paint to stand out. Glossy finishes should be reserved for hallways, and a semi-gloss is best suited for trim. Invest in pre-primed paint whenever possible. This cuts down on time by combining the layering process.

Almost any paint job will require a primer, which will cost anywhere from $7 to $15 per can. Primer helps the paint to stand out against the underlayer of paint it’s covering, especially if the new paint is lighter than the old coat. You will need at least two cans of primer, if not more, to cover one wall.

Supplies Needed

Paintway will typically provide most of the supplies for a project, but sometimes they will allow you to pay for solely labor if you provide all of the materials yourself. You might decide to do a DIY paint job down the road, in which case having these supplies on-hand will save you time and money. The supplies you should invest in include:

Brushes: Trim and sash brushes for intricate painting, beaver-tail handles on larger brushes for larger surfaces.
Tape: Standard painter’s tape to protect trim and ceilings from droplets.
Drop cloth: To protect floors and furniture from drips.
Paint tray: To keep out only a portion of paint rather than drying out an entire litre.
Paint rollers: A quick way to cover a large portion of a wall in paint.
Ladder: Necessary for reaching high areas (don’t use a chair!).
Small brushes: For touch-ups.

Additional Updates

Consider having your molding, trim and baseboards checked while you have a professional painter in your home. This might be a good time to upgrade or repair any cracks, warps or other issues. Paintway usually touch up or replace these items for an affordable rate, and they may even package such fix-ups with your painting project.

Cost of Painting a Room as a DIY Project

A handy homeowner can buy paint and equipment for about $200 to $300. Don’t forget to factor in the time it will take you to do this yourself though. Depending on the size of the room and how much help you have, this could be a day project or a weekend project.

Here are the general steps to follow when painting a room on your own:

Decide on a color palette: Earth tones and neutrals will cover up marks, scratches and hand prints.
Buy supplies: You will need rollers, brushes and other supplies (see above) in addition to paint and primer.
Remove furniture: Remove all furniture from the room to protect it from drips and avoid trips and falls.
Clean the walls to be painted: Clean with a water and detergent mixture. For any stains, use trisodium phosphate.
Remove outlet covers and switch plates: Remove but don’t paint the sockets or switches. Turn off electricity in the room to avoid an accidental shock.
Outline: Put any painter’s tape over baseboards, trim and edging to avoid drips.
Paint the first coat.
Apply the second coat.
Touch up: Touch up baseboards and ceiling trim as needed. Also touch up any spots on the wall.

Do you have a problem with flaky or cracked ceilings? Read on…..

Problem Ceilings? (Peeling and Flaking Paint)

The most common problem area when it comes to painting is the ceiling. Especially in Bathrooms because of Moisture! Or where we are based here in Toowoomba in the Mountains there can be months of high moisture from being in the Clouds.

There are several problems that can occur on a ceiling to categorise it as a problem area:

Calcimine Paint

Fibros plaster ceilings were originally being painted with calcimine paint. Calcimine paint came in powdered form. It was mixed with water then applied to the ceiling. Once it dried by the water evaporating it left a coat of pigment powder on the surface of the ceiling. Years later the ceiling would have been recoated using a flat plastic paint which resulted in the calcimine pigments and powders sucking all the binders out of the new plastic paint making them unstable. Over the years with extra coats being applied to the surface creating extra pressure as well as gravity doing its job causes the paint to flake.

Incorrect application

In the early 80s where gyprock homes were being built to price and with little knowledge of paints the incorrect application was being used. Painters were applying flat paints straight onto bare gyprock and therefore, the paint was not soaking in like a primer would usually do. This application process becomes unstable over the years as well as more coats being applied over time creating more pressure on the surface and gravity doing its job the result is a problem ceiling which peels and flakes.

Moisture

One of the more common issues with problem ceilings is moisture. There are several reasons why moisture occurs. Moisture from storm damage can release the coating from any ceiling surface causing peeling or blistering paint. Also wet areas in the house such as the kitchen, laundry and bathroom can create moisture. For example in a bathroom with lack of ventilation, steam damage can occur to the coating causing it to flake and peel. Using paint with a higher sheen level may help reduce water absorption which accelerates peeling ceilings.

Style of home

Queensland style homes most commonly have VJ timber ceilings. When flaking occurs on these types of ceilings it is usually due to new acrylic paint being applied over old enamel paint. This occurs because acrylic paint is flexible by nature and the enamel coating is rigid. Therefore over time due to changes in temperature the different paint properties work against each other resulting in the top layer delaminating. To solve this issue the acrylic coating needs to be completely removed followed by using a general purpose undercoat to stabilise the surface before recoating.

The common theme in the above reasons for problem ceilings is PREPARATION, wrong application and the ceilings history. Due to these reasons it is hard for the painting of a ceiling to be done at time. However, no matter how much preparation occurs if the history of the ceiling is problematic it is difficult to treat with a simple paint application.

Movement happens with all homes every 10 years or so…causing joins and cracks to also appear.

Call us today for a free ceiling assessment here:

How Paint Colours Can Actually Change your Life

A small paint colour change can make a huge difference in your space. Paint colours could be used to bring positive energy to every room of the house.

For a couple’s bedroom, you want harmony and romance.

You want to focus on your purples and pinks, or lighter like orchid, What this does is creates harmony and intuitive love. So you would be embracing romance from the standpoint of love and how you are intuiting the person. It’s a fabulous way to approach relationships in the bedroom (literally and metaphorically).

Family spaces speak better in peaches and beiges.

peach-and-beige

These colours will create the awareness of laughter and a sense of family and community, so you’re embracing the whole group in the house,

For accents, you can also do ivory or light blue, but be careful when when using pure whites: You want rooms separated with lines, colours that will move into the arena of change. With ivories you’ll be defining the rooms, creating borders and boundaries.

In a kitchen, you want to encourage health and growth.

Greens are good on cabinets and counters but not on walls, and we suggest mauves, light blues, and aquas as accents. You don’t want to keep much white except for appliances, which are best in silver, white, and other neutrals, White is a static colour, while blues and greens are harmonious and foster growth.

Yellows and greens in a child’s room foster healthy emotional growth

You want the child to grow emotionally, but you don’t want them to focus on emotions in a way that makes them volatile, We suggest yellows and greens and to stay away from colours like red that spark strong excitement but also strong anger.

In a home office, greens and greys foster creative and financial prosperity.

Whenever you want colours for money and success, that’s the green family, That helps you to embrace growth — both financial and personal.

In a single person’s bedroom, blues and greens provide calmness.

Blue gives you an aspect of communication,And what you’re communicating to yourself is a calm, allowing yourself to feel very serene and at one with your own energy. You can also incorporate shades of green, or different patterns that are greens and blue. That speaks to healing and the heart chakra. This is encouraging, and it means they are not going to be single for long, but while they are single they are in a good place. They’ll feel good about themselves.

In a space shared with roommates, tans and browns allow for reason and communication.

Variations on brown or grey in a light hue are best, and not white or black. It allows people to reason. They’re not seeing things in black and white they’re seeing things in detail.

Visit us today at paintway2019.au3.live-preview.net or Visit us on Facebook

How to revive a old Kitchen with a Fresh Coat of Paint

How to Paint Kitchen Cabinets
Many old homes have a recurring issue with a claustrophobic kitchen. Dark wood paneling on the cabinets combined with a ’70s paint job makes the whole room feel enclosed, dark and stuffy. Sometimes even a nice window refuses to let in enough light to brighten up the place. In these cases, it is amazing what a little paint can do. Coat your cabinets with a light colored paint and suddenly the space feels much more open and airy.

Step 1: Make Decisions

You probably won’t be able to take one look at your cabinets and decide what paint color you want. Do you go for a pastel shade of blue or green? Is a yellow shade more appropriate for the rest of your decor? Bring home a set of sample paint swatches and picture what the room will look like primarily in that color. If you have talent with a computer graphics program, you can even attempt to simulate it.

Once you have decided on your color, you can also decide on your hardware. Do you want to keep the old drawer handles and hinges, or will you update to a more modern set? Be aware that new hardware might not be able to use the same holes as the current hardware, so you may need to adapt to different spacing.

Step 2: Prepare

Buy your paint. Buy your hardware. Buy your paint supplies, including any brushes and small rollers you want. A pair of small rollers and a pair of angle-tipped brushes should be plenty. Pick up a drop cloth to paint on. They only cost a couple of dollars and they serve quite well for this and other house painting projects. For kitchen cabinets, you will probably want a latex paint with a semi-gloss finish. This makes a nice resistant surface for later cleaning. You can always bring a detached door to the hardware store and ask the people who work there what kind of paint they recommend.

Once you have all of your supplies, remove all of the hardware from your cabinets. This includes the hinges, so you will be removing the doors as you go. Store all of the hinges and handles in a single bag so you never lose a piece. Once all the doors are loose and the cabinet frames exposed, it’s time to clean. In all likelihood, years of grease and grime have built up on these wooden surfaces. Take some grease-cutting soap and scrub them clean.

Step 3: Preparing the Surface

If you chose to go with new hardware, you may have discovered that it doesn’t quite fit in the old holes. You will need a tube of wood filler from your local hardware store to patch the old holes. When you’re painting cabinets like this, you won’t need to worry about matching the shade of the wood too closely. This is also the time to patch any annoying gouges and dings on the cabinets themselves. This way you’ll have a nice smooth surface once the paint is applied.

Examine the surface of your cabinets. Is it shiny? Chances are it is covered with layers of protective polyurethane. If you need help deciding whether to sand, feel the surface. Is it matte and slightly absorbent like a good cutting board? It’s probably fine without sanding. Does it feel more like a piece of plastic? Chances are you should sand it. If they are already painted, see if you can determine how old the paint is. Old paint might contain lead, and it’s best to remove it before you paint over it. Be careful! Lead paint is a health hazard, and sanding will get particles of it everywhere.

Step 4: Prime Everything

Even though you have already cleaned and sanded your cabinets, there still may be years-old grease stains deep in the wood. Don’t worry about sanding them out. Primer paint is designed specifically to hide these kinds of things. You will probably want to go for an oil-based primer, because grease stains have been known to seep through water-based paints and show on the new surface. One coat of oil-based primer should work perfectly for your cabinets.

Using a small paint roller, apply primer to the cabinets. You can use a small brush to work the paint into smaller grooves and patterns that the roller won’t reach. One coat should be plenty. Your primer is only there to cover the majority of any color, pattern and stain underneath. It serves to prime the surface for the actual paint later on. Once you have applied the primer, go ahead and let it dry for a couple of hours. Don’t worry about cleaning out the roller and brush — oil-based primer is hard to clean. Save the tools for any later house painting projects you may have.

Step 5: Painting

The primer should be tacky but dry by now. You can do the majority of your painting with a small roller, using your brush sparingly. This helps minimize the texture difference caused by brushstrokes and helps you paint more quickly. You will want to wait for the first coat to dry before applying the second coat. It is entirely possible, if you started early, to finish priming and painting cabinets in the space of a day.

The process of painting is where all the fun is. You get to see your chosen color displayed for the world on your cabinets and drawers. Use a steady hand to roll on paint in even strokes. Your roller is perfect for most of the cabinets and doors. It will let you easily cover the flat surfaces. For smaller crevices and grooves in the wood, use a small brush with an angled tip. The angle will help you work paint into the small grooves and corners without leaving large drops pooling in small recesses.

Did you plan to paint the inside of the cabinet doors? If so, do the inside first. You should let the primer and paint dry for several days before flipping them over to paint the outside. You do the inside first so that if anything goes wrong when you flip it, the mistakes are mostly hidden. You wait several days so the paint has had time to solidify and can resist damage.

Step 6: Finishing Up

Paintway advise you to wait for at least three days before hanging your doors once more. This gives the paint plenty of time to dry and harden. Five days is best for the most safety.

If you’re using old hardware, simply reattach it where it was before and replace everything. If you’re using new hardware, you will need to drill fresh pilot holes for the new screws. Make sure you follow the old construction adage. Measure twice, cut — or drill — once. Even taking your time, this will only take an hour or so. Finally, with your freshly painted doors hung once more, you can enjoy your new kitchen

Why Choose Paintway Toowoomba to Paint Your Home?

When you invite us into your home, The Paintway team will act respectfully and be as considerate of your space, and life, as possible.

Our promise

Paintway promises our homeowners that we will: start and finish on time; maintain a neat and clean project; make sure our language isn’t offensive; take care of all details; and stand behind our work. We care about how you feel while the work is getting done.

Paintway’s approach to interior house painting

The inside of your house is where you relax, unwind, entertain and it is truly the space you call home. Creating rooms you will enjoy requires thorough prep work and extreme attention to detail, but that’s not all—it requires ongoing communication, trust, and respect.

Five steps to a successful paint job

Discuss your desired end result
Consult with James for colour and finish recommendations
Protect all your surfaces and belongings
Properly Prepare all interior surfaces to be painted
Use top quality tools to expertly apply your coatings

Top quality tools. Top quality results.

Paintway generally uses Luxury and Dulux paints. The brand of paint used is influenced by many factors including customer preference, the nature of the project, and bid specifications. When selecting a brand of paint, we recommend using the highest grade available because the best paint will provide the best results. To make sure the finish is everything it should be, we use top quality materials, tools and supplies.

Paintway understands that we are reflecting your values when working on the exterior of your home and pay attention to the details when making your home and neighbourhood more beautiful.

We understand that the exterior of your home is the first thing a visitor sees. A beautiful exterior shows the world that you care about your home and the community you live in. Our thorough prep work and extreme attention to detail is an important factor when painting the exterior of your home, it helps create a good impression for you and your neighbours. We pride ourselves in the relationships we build with our customers, through ongoing communication, trust, and respect.

Considerations to Make If you are going to Paint your own Home.

Painting the whole outside of your house is a major job. But your home may not need a whole paint job. You may be able to spiff up the appearance of your home and extend the life of an entire paint job by several years with regular maintenance and some quick repairs. Whether you decide to paint a porch, the most weathered side of your house, or an outbuilding or two, the general process is the same as painting your whole house.

You’ll need to clean and prep the surface, decide what type of paint to use, and apply the paint. The best time to paint is in late spring or early Autumn on a dry day that is not too sunny. Temperatures below 40 degrees F and direct hot sun can ruin paint jobs. Inspect your house thoroughly before you paint, and take corrective action to prevent the root causes of paint failure.

We’ll hit on all the basics of exterior painting in his article, starting in this first section with how to deal with various paint problems.

Peeling

Peeling is often the result of painting over wet wood. It can also result from moisture within the house pushing its way out. If you cannot control the moisture with exhaust fans, use latex primer and latex paint. Latex allows some moisture to pass right through the paint.

Another cause of peeling is a dirty or a glossy surface. To undo the damage, all loose paint flakes must be scraped off with a wire brush and the surface must be sanded to smooth sharp edges. Bare spots should be primed before painting.

Alligatoring

This problem looks just like its name suggests: the hide of an alligator. Paint shrinks into individual islands, exposing the previous surface, usually because the top coat is not adhering to the paint below. Perhaps the paints are not compatible or the second coat was applied before the first coat had dried. To get rid of this problem, scrape off the old paint and then sand, prime, and repaint the surface.

Blistering

Paint that rises from the surface and forms blisters is usually due to moisture or improper painting. To fix the problem, first scrape off the blisters. If you can see dry wood behind them, the problem is due to moisture. If you find paint, then it is a solvent blister and is probably caused by painting with an oilbase or alkyd-base coating in hot weather. The heat forms a skin on the paint and traps solvent in a bubble.

Wrinkling

New paint can run and sag into a series of slack, skinlike droops. This occurs when the paint you are using is too thick and forms a surface film over the still-liquid paint below. It can also happen if you paint in cold weather; the cold surface slows drying underneath. To recoat, make sure the new paint is the proper consistency and be sure to brush it out as you apply. Before doing this, though, you will have to sand the wrinkled area smooth and, if necessary, remove the paint altogether.

Chalking

This is paint that has a dusty surface. Some oilbase and alkyd-base paints are designed to “chalk” when it rains. When this happens, a very fine powdery layer is removed, automatically cleaning the surface. In most cases, this is desirable. But if foundations, sidewalks, and shrubs become stained, too much chalking is occurring.

This is likely due to painting over a too-porous surface that has absorbed too much of the paint’s binding agents. A chemical imbalance in an inferior paint may also be the cause of excessive chalking. The best solution is to wash down the chalking surfaces as thoroughly as possible, then paint over them with a nonchalking paint.

Mildew

This moldy growth appears where dampness and shade prevail. And, if you paint over it, it’s likely to come right through the new paint. Use a fungicide such as chlorine bleach or a commercial solution to kill patches of mildew before repainting.

Running Sags

Using a paintbrush incorrectly (e.g., too much paint on the brush) can create a wavy, irregular surface. To correct it after the paint is dry, sand and repaint surface, smoothing out the new coat to an even thickness.

Paint Won’t Dry

This is perhaps the best reason to buy high-quality paint. Prolonged tackiness is an indication of inferior paint. If you apply poor-quality paint too thickly or during high humidity, it will stay tacky for a long time. Good paint, on the other hand, dries quickly. If you think you may have an inferior paint, first experiment on an inconspicuous portion of the house.

Think you’re ready to get started? If not contact paintway today for a free quote 🙂

paintway2019.au3.live-preview.net

Should I use Primer before I paint?

Using a primer before you paint is a great way to improve the quality of your paint job. You don’t need to prime your surface in all situations, but used properly, a primer can make all the difference.

When You Should Use a Primer?

Priming before you paint isn’t always necessary, although there are occasions when priming your surface can help you achieve a perfect, professional finish.

Here’s when you should prime before you paint:

Your walls are brand new. All new plasterboard needs to be sealed with a primer before it is painted.
If your existing paint job is dry and chalky. Paint becomes chalky as it begins to breakdown. In this case, you’ll need to wash the walls thoroughly, and apply a suitable primer to create a smooth surface for the new paint to adhere to.
If you are painting over oil based paint with acrylic paint. Acrylic paint won’t adhere properly to oil based paint unless an acrylic primer is used.
If you have mended cracks or holes. New plasterboard should be sealed with a primer.If you walls are currently dark, and you want to paint them a light colour. The primer will help cover up the dark hue, so your new, light paint will show up brighter.

The Benefits of Using a Primer….

Painting a primer on your surface is a simple way to improve the finish of your paint job, and make it last longer. In most situations you can achieve better results with one coat of primer and one coat of paint, rather than two coats of paint.

Here are few benefits of priming your walls before you paint:

Priming will ensure your colour is rich and vibrant. Primers can hide the colour you are painting over – even dark reds and blues – so the old colour doesn’t alter the new colour.
Priming will create the ideal surface for paint to adhere to. While paints are rich in pigment, primers are rich in resin. This means paint can cling to primer more effectively than old paint. Primer also evens out your surface, so you can achieve a consistent finish.
Primers can prevent stains. Primers seal the surface, and therefore block out stains so they can’t ruin your paint job.
Primers can increase the longevity of your paint. Primers can help prevent peeling, cracking and blistering. They will also ensure the paint colour doesn’t fade.

Use psychology to colour your home……

Colour choice is a big step when you’re redecorating. No matter which room – be it a home office, children’s bedroom or ensuite bathroom – the colour is going impact how that space feels in more ways than one.

As you may know, colour plays an important role in the physical make up of your project. It highlights specific features, creates bold lines and shadows or flattens the ceiling and walls to create a sense of space. However, it also has psychological aspects to it. Here is a run down on how different hues can change the way you feel about a room.

Red

Red is a strong, passionate colour and can have quite drastic uplifting effects on the occupants of a red-inspired space. According to colour psychologists, red helps bring people together in a room and instigates conversation.

Hues like Sensual Red and Shiraz both bring out the energy in people, and create a powerful first impression around an entranceway. Some consider it too much for a bedroom, though that being said, its high adrenalin may still be for you. If you want red in a bedroom without going overboard, try using it on the wall behind the bed. That way you’ll get to enjoy it while you are moving around the room, but if you’re sick in bed you won’t have it keeping you awake.

Blue

Entirely the opposite of its red counterpart, blue acts as a peacemaker and is a calming colour to be amongst. In fact, anyone who talks to you about feng shui will discuss how serene and freeing the colour can be. However, the choice of blue is important because the wrong tone can create negative emotions, rather than calming ones.

For example, pastel blues can make a room appear cold and very dark blues can invoke a sense of sadness. Don’t avoid the colour, however, instead just focus more on mid-tones like Navy Blue or Periglacial Blue then scatter some warmer features to accompany.

Green

Though the mere mention of green might turn some of you away, don’t discount the colour just yet. According to feng shui, green is the ancient colour of movement and nature. It is a pleasant colour to look at and has a calming effect as well, thanks to it being a combination if blue and yellow.

Used in a study, office, library or other place of work it will help stimulate restful minds within the occupants, hopefully making them a little less distracted. If you’re worried about the look of a luminous lime green, consider something more along the lines of Citrone Green, Sushi Green, or use in small doses.

White

White and off-white are great for almost any room, and instantly brighten it up and disperse hard lines and shadows, offering a sense of space and happiness.

Whites like Merino or Half SoapStone symbolise purity, cleanliness and air, which is why they’re so good for small apartments, cramped houses and bathrooms. Covering the entire space, however, gives some people the idea of a sterile space – maybe because hospitals and such are predominantly bright colours. White can, however, be used to effectively uplift highlights and accents instead.

Greys/Blacks

As a primary colour, greys and blacks don’t always work so well by themselves, as they can give off all of the wrong impressions. For example, black instantly darkens a room as it absorbs colour, and the wrong use of grey can give the impression of fear and restraint. Used to highlight, feature or accent, however, these neutral colours are perfect.

Set against a bright backdrop, such as white, black stands out perfectly and gives a sense of elegance. Grey can have a similar impact, too, though on a more subtle level. In your spaces, try defining with Delta Grey, Fuscous Grey or Grey Triple Mondo.

Hope you enjoyed Reading about these tips to help choose your colour for your home.

Quick KEY Tips to Paint Your Home…..Follow some of these simple D.I.Y tips

1. Slosh Your Brush Quick KEY Tips to Paint Your Home

Before painting, slosh your brush in whatever solvent you will be using at the end of the day to clean the brush (i.e., water for latex, mineral spirits for oil, etc.) It’ll be easier to clean when you’re done.

2. Wrap Brush or Roller

If you don’t feel like cleaning your brush or roller at the end of the day and expect to get back to painting within a few days–

3. Latex Gloves or Lotion, Your Pick

Latex gloves are great for keeping your hands clean (especially if you’re using oil-based paint!). If you can’t stand latex gloves or are allergic, a thick application of hand lotion before painting will make cleaning a lot easier later on.

4. Wet Edge

Always keep a wet edge as you paint, and work away from that wet edge. If you paint over a dry edge, you will get overlap marks.

5. Avoid Cheap Roller Covers and Brushes

This one is important. Cheap roller covers leave fuzz on the wall. Cheap brushes leave streaky brush marks. Avoid those multi-packs of rollers, ten for a dollar. Pay the extra few cents and get better tools. It’ll be worth it. Honest it will.

6. Test for Loose Paint

Will the existing painted surface take new paint? And hold it for years to come? Test this out by adhering a strip of duct tape to the existing painted surface and…ripping it away. If flakes of paint more than microscopic size come off, you may need to scrape and sand

7. Low-Stick Masking Tape

Also known as “blue tape,” this tape comes off easier and doesn’t peel off primer or existing paint. Blue tape, by itself, will save you at least an hour of frustration over the old-style beige masking tape.

8. Rein in Your Paint Can Opener

Paint can openers, those little metal keys (you do use one, don’t you?) are notorious for getting lost in the shuffle. Chain it to a small chunk of wood just like a public bathroom key. Whatever you do, just don’t lose it!

9. Painting Process

Paint in this order:
Ceiling
Walls
Trim
Cabinets
Doors
And remember to always paint from top-down!

How to Find the Right Painting Contractor?

Your time is valuable! Hire a professional painter for your next project😀

Using a professional painting contractor takes the stress out of painting your home. But finding the right one is an important decision that requires careful consideration.
Paintway give you the following tips to hire the right professional for any painting project:

The best way to find a quality painting contractor is to get referrals from friends, neighbours, and acquaintances who have had good experiences with painting contractors in your area.

Get Quotes from at Least Two Contractors Paintway are always competitive with price.

If quotes differ widely from one another, ask what is not being done or where corners are being cut. Often the less you pay the quality will suffer. Cheap Price …Cheap Painting Job 🙂

Don’t be afraid to ask questions! The only silly question is the one that isn’t asked!

Always ask contractors the following questions:
How long have you been in business?
Do you have the proper/required licenses? (This varies by state, and some states may not require licensing.)
Do you have insurance? (This helps determine whether your contractor and any hired workers are insured for injury and liability.)
Can you provide references?
Do you offer written guarantees of your work?
What products do you use?

Be Specific About the Project
It’s a good idea to walk each potential contractor around the areas (indoor or outdoor) to be painted while discussing your needs, and particularly any aspects of the project that could affect the price. Be specific about which surfaces you want to have painted (walls, trims, moldings, ceilings, etc.) and the paint colours and finishes you want used.

As you meet with each contractor, pay attention to the following signs and behaviours:
Does the contractor project a sense of professionalism and experience?
Is the contractor courteous and business-like?
Is the contractor busy? (Good ones usually are.)
Does the contractor return phone calls and provide quotes in a timely manner?
Is the contractor on time for appointments?

Review the Contract
Once you’ve settled on a contractor, ask for a written contract and review it carefully. As a consumer, you have the right to ask detailed questions about any issues you need clarified. In particular, be sure to verify the following:
What exactly is being painted (house, trim, walls, moulding, etc.)
Details on preparation and cleanup We always CLEAN UP! Alot of Painters Don’t.
Paint colours for each area to be painted
How the contractor will protect plants, patios, furniture, or other items
How much time the project will take, from start to finish
When and how the contractor will be paid
Once you complete these steps, you’ll be ready to hire the right painting contractor—and enjoy your newly painted home.

On This Page: